18 November Export-Control Start, Blade Classification Tests, 200 t Low-Cost Carbon Fibre and 60% Long-Carbon-Fibre PA12: Composites Digest, 13 November 2026

Composites industry digest from LX Composites for 13 November 2026 — six objective trade, supply, demand and processing signals.

China’s dual-use announcements take effect on 18 November, with carbon-fibre blades on the list

The three dual-use announcements published on 19 October all carry an effective date of 18 November 2026: No. 49 on drones and related items, No. 50 on shield machines and other equipment, and No. 51 on dredger pumps, cutters and heads. Each is accompanied by a synchronised revision of the Dual-Use Items Export Control List, which now carries 9A901.c for carbon-fibre composite blades. Announcement No. 52, in force from its publication date, refines the customs challenge and commerce-ministry identification procedures and repeals GACC Announcement No. 123 of 2025.

A review of the commerce ministry’s announcements directory on 13 November found no new dual-use notices issued since 9 November. The most recent documents remain MOFCOM Order No. 4 of 2026 and the joint MOFCOM and GACC Announcement No. 58 of 2026, and the routine press conference on 12 November produced no further additions.

The licensing line for composite intermediates is unchanged. Carbon-fibre PAEK (PEEK) prepreg, carbon-fibre woven fabric and hydrogen-vessel parts require a licence. CF/PA6, CF/PA12, CF/PP, CF/PC, CF/TPU and CF/PPS thermoplastic prepregs are not listed. Glass-fibre unidirectional tape is listed in China under 1C210.b and is not controlled in the EU, so the same article can be licensable on one route and unrestricted on another.

Sources: MOFCOM government information disclosure — https://www.mofcom.gov.cn/zfxxgk/index.html; Dual-Use Items Export Control Regulations — https://xzfg.moj.gov.cn/front/law/detail?LawID=1735; HS 6815131020 regulatory conditions — https://www.hgsj.com/hs-code/6815131020

Both easing windows now run to early January 2027

Announcement No. 58, effective 11 November, keeps the measures of 2025 Notices No. 55, 56, 57 and 58 and No. 61 and 62 suspended until 10 January 2027. The measures concerning 16 US entities, together with the unreliable-entity-list measures, are suspended for a further two months. On the US side, 178 Section 301 exclusions have been extended to 9 January 2027.

The distinction that matters for order planning is that what is suspended is the tightened set of measures, not the per-shipment licence obligation that attaches to listed items. A shipment crossing 18 November still needs its classification and documentation settled before the date, because the obligation itself never paused.

Carbon-fibre blade classification: two tests, both of which must be met

A legal commentary published on 11 November reads Announcement No. 49 as controlling items through a dedicated design, adaptation or mating relationship with controlled unmanned aircraft, rather than through the intrinsic sensitivity of the item itself. Two conditions have to be satisfied cumulatively: the item must belong to the drone-related category, and its technical parameters must reach the thresholds written into the list. General-purpose items with no drone relationship do not fall under the announcement merely because they are made of carbon fibre.

The announcement continues a sequence that runs from the temporary controls of 2023 (No. 27 and 28) through the 2024 optimisation (No. 31) to the unified list of 2024 (No. 51, covering codes such as 9A012), and now adds brushless motors, electronic speed controllers and carbon-fibre blades under 9A901. One practical question remains open: how applications already in process when the list changes should be handled. No official position has been published on that point, which leaves shipments spanning the date exposed to procedural risk rather than to any change in the substantive test.

Sources: commentary on Announcement No. 49, 11 November 2026 — https://www.163.com/dy/article/LBF9IHUL05562JTQ.html; analysis of the four announcements — https://www.eccpit.com/news/Y21zcG86MzM3MDA

A 200 t/yr low-cost industrial carbon fibre line enters energy review in Ningbo

The Zhenhai district development and reform bureau in Ningbo published an energy-saving and carbon-emission evaluation notice on 11 November for a new carbon fibre project, under the provincial fixed-asset investment energy review rules (Zhejiang DRC Energy No. 116 of 2026). Total investment is CNY 110.03 million, with new oxidation furnaces, carbonisation furnaces and chillers. Design capacity is 200 t/yr of industrial low-cost carbon fibre. Additional annual comprehensive energy consumption is 7,376 t of coal equivalent on an equivalent-value basis, or 4,489 t on a calorific-value basis. The consultation window runs 11–17 November.

The filing sits at the energy-review stage, ahead of environmental approval and well ahead of commissioning, which makes it one of the earliest official signals a new line produces. On comparable projects the interval from this stage to output runs 6–18 months. At 200 t/yr the volume is small and upstream of thermoplastic intermediates, so it does not move near-term pricing; it belongs in 2027 low-cost fibre purchasing assumptions rather than in current quotations, and it should not be merged with large-tow projects into a single “supply is loosening” conclusion.

Source: Zhenhai district development and reform bureau, 11 November 2026 — https://www.zh.gov.cn/col/col1229821563/art/2026/art_c7d517ff25f74cdea26eed6383fe49f6.html

Humanoid-robotics model points to 5,100 t of carbon fibre in 2030

A broker research note published on 12 November models 2030 demand for humanoid-robotics materials on an assumed global output of 605,700 units, about USD 15 billion in value, with 6.9 kg of PEEK and 8.5 kg of carbon fibre per unit. On those assumptions the 2030 requirement comes to 4,140 t of PEEK and 5,100 t of carbon fibre, with the PEEK figure equal to roughly 40% of 2024 global demand. Existing domestic PEEK capacity is cited at about 1,000 t.

The note also reproduces published test data for PEEK reinforced with 30% carbon fibre: tensile strength rising from 90 MPa to 210 MPa, and flexural strength from 150 MPa to 298 MPa. That is the more solid half of the argument, since it rests on measured values rather than on a unit-volume assumption.

The demand figures are model output, not orders, and the per-unit material content is the single assumption the whole total depends on. The material consequence is narrower and easier to act on: CF/PEEK sits on the licence list, so any real growth in that demand pulls licensing workload along with it.

Sources: broker research on humanoid-robotics materials, 12 November 2026 — https://m.10jqka.com.cn/20261112/c681770537.shtml; https://m.10jqka.com.cn/20261112/c681763012.shtml

60% long-carbon-fibre PA12: the property band and the processing window that sets the cost

A technical note circulating in Chinese industry media gives the magnitude for a 60% long-carbon-fibre PA12 injection grade: tensile strength above 250 MPa, flexural modulus above 20 GPa, heat deflection temperature approaching or exceeding 180–200 °C, density around 1.3 g/cm³ and mould shrinkage controllable within 0.1–0.3%.

The processing section is the part that explains cost. Abrasive fibre makes a bimetallic or carbide screw and barrel a precondition rather than an upgrade. Melt viscosity rises with fibre content, so injection has to sit in a narrow band between complete fill and fibre breakage, which calls for a low-compression-ratio, low-shear screw and enlarged gate and runner sections. A higher mould temperature reduces fibre float but lengthens the cycle. PA12 absorbs little moisture, but once the resin fraction is reduced by fibre loading, the residual water that remains is enough to weaken the interface at processing temperature. Applications concentrate on engine-bay structural brackets, battery-pack load frames, drone arms and high-load gears and pumps.

The note carries no primary source and no publication date, so the figures are order-of-magnitude only. Each of them has to be traced back to a supplier datasheet before it appears in a specification, a datasheet of your own or a quotation.

Source: technical note on 60% long-carbon-fibre PA12 — https://dy.163.com/article/LAQSS67O05569K47.html

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top

联系我们 / Contact Us

丹阳理兴碳素制品有限公司
Danyang Lixing Carbon Products Co., Ltd.

地址 Address中国江苏丹阳市云阳街道南三环路丹阳高新技术创新园 212300
网址 Weblxcomposites.com
工作时间 Hours周一至周五 8:30-18:00