18 November Export-Control Deadline, UD Tape to Woven Preform Chains, 7.4 mm Thermoplastic Welding and 36 g/m² Plies: Composites Digest, 11 November 2026

Composites industry digest from LX Composites for 11 November 2026 — seven objective trade, process, welding, material-format and certification signals.

Export-control deadline on 18 November: no further dual-use notices since 19 October

Notice No. 58, published on 9 November, states that from 11 November 2026 to 10 January 2027 the measures in Notices No. 55, 56, 57 and 58 as well as No. 61 and 62 of 2025 remain suspended. A spokesperson statement issued the same day confirms that the measures of Notice No. 21 of 2025 concerning 16 US entities stay suspended for a further two months from 10 November, and that exporters wishing to supply dual-use items to those entities must apply for a licence for each shipment.

A check of the announcements directory on 11 November found no new dual-use control notices since the four notices issued on 19 October — No. 49 (drones and related items), No. 50 (shield machines and other items), No. 51 (dredger pumps, cutters and heads) and No. 52 (question and identification procedures). All four share an effective date of 18 November 2026, seven days from this digest.

For composite intermediates the licensing line is unchanged: carbon-fibre PAEK (PEEK) prepreg, carbon-fibre woven fabric and hydrogen-vessel parts require a licence, while CF/PA6, CF/PA12, CF/PP, CF/PC, CF/TPU and CF/PPS thermoplastic prepregs are not on the control list. Glass-fibre unidirectional tape is listed in China under 1C210.b but is not controlled in the EU. HS 6815131020, covering aerospace carbon-fibre prepreg with modulus at or above 50 GPa and radial tensile strength at or above 500 MPa, carries regulatory condition 3, a dual-use export licence requirement and a 0% export tax rebate, so it cannot be modelled under the 13% rebate applied to composite finished goods.

Sources: MOFCOM and GACC Notice No. 58 of 2026 — https://aqygzj.mofcom.gov.cn/qdml/art/2026/art_5c9199b52ff24171aeef73a10576815b.html; spokesperson statement, 9 Nov 2026 — https://www.mofcom.gov.cn/xwfb/xwfyrth/art/2026/art_5baeb69ccc0f44cb83dea8ac587dd327.html; National Administrative Regulations Database, dual-use export control regulations — https://xzfg.moj.gov.cn/front/law/detail?LawID=1735; HS 6815131020 — https://www.hgsj.com/hs-code/6815131020

UK project links unidirectional tape to engineered woven preforms on an 1100-tonne cell

OPTIMA — Optimisation of Thermoplastic Composites Manufacturing with Intelligent Automation — is a two-year programme led by CCP Gransden with the University of Sheffield AMRC and Sigmatex, funded through the Aerospace Technology Institute SME Programme and Innovate UK. It was presented at Advanced Engineering in Birmingham on 4–5 November.

The work splits into three stages. AMRC uses a new twin-mould thermoplastic processing line to tailor unidirectional tape; Sigmatex converts that tape into engineered woven architectures and studies in-line monitoring with adaptive process control; CCP Gransden then forms aerospace demonstrators on an 1100-tonne ENGEL V-duo high-rate cell, examining pressure, heating, forming and cycle conditions together rather than in isolation. Each demonstrator carries a digital product passport recording material origin, fabric manufacture, part process parameters, inspection data and lifecycle information, so a finished part can be traced back to a specific material batch and process setting.

The traceability requirement is the part worth noting for aerospace supply chains: multi-tier programmes increasingly need batch-level evidence to travel with the part, not just a certificate of analysis for the incoming material.

Source: Industrial News, November 2026 — https://industrialnews.co.uk/optima-develops-high-rate-aerospace-composites-manufacturing

One-shot press forming plus overmoulding demonstrated on a ribbed structural part

A mould-maker and a thermoplastic research centre reported progress on 9 November with a demonstrator that combines continuous-fibre tape with short-fibre overmoulding in a single tool. The V-shaped part contains four ribs, one flat area, one metal insert and one composite insert. The continuous-fibre section uses Toray T700G / TC1225 unidirectional prepreg tape; the overmoulding compound is Victrex PEEK 90HMF40, a 40% short carbon-fibre grade.

Both a single-step and a two-step route are being compared for their effect on structural performance and interface bonding. The single-step variant runs on a KraussMaffei KM 160 CX 750 injection unit with a robot transferring the preheated laminate into the tool. The project started at the end of 2022, with the mould-maker introduced to the programme through Syensqo.

For buyers, the consequence is that tape and short-fibre compound are increasingly quoted together for the same part, and the interface between the two becomes a specification item rather than a downstream detail.

Source: Wedoany international short news, 9 Nov 2026 — https://en.wedoany.com/shortnews/510389.html

Thermoplastic continuous-fibre forming pushed toward low-altitude and robotics applications

At the ninth China International Import Expo, held 5–10 November, KraussMaffei presented injection, extrusion and reaction processing as technologies migrating from automotive into applications with higher lightweighting, precision and consistency requirements. The eVTOL carbon-fibre covers and drone blades on the stand were produced by HP-RTM, a thermoset route. The thermoplastic line presented was FibreForm, which combines continuous-fibre reinforced thermoplastic forming with injection moulding to cut weight while supporting short cycle times.

Named target segments are the low-altitude economy, embodied intelligence — robot housings and dexterous hands — and green building. HP-RTM and FibreForm belong to different material systems, thermoset and thermoplastic respectively, and are frequently conflated in enquiries; the process route determines whether a customer needs dry fabric and resin or a consolidated tape or laminate.

Source: Sina Finance, republishing China Chemical Information Weekly, 9 Nov 2026 — https://finance.sina.com.cn/roll/2026-11-09/doc-iniycrzy3248546.shtml

Induction welding qualified on 7.4 mm thermoplastic stringers, with infrared defect detection to 4.5 mm

The Airbus-led FASTER-H2 project, running 2023–2026 at technology readiness level 4, has reported four validations completed by NLR. Fibre-optic acoustic emission sensors detected micro-cracks in a composite liquid-hydrogen tank at 20 K. A twin-hinge rudder configuration maintained aeroelastic stability. Induction welding of 7.4 mm thick thermoplastic composite stringers to skin reached high strength at coupon level and matched model predictions. Infrared thermography resolved defects 4.5 mm deep in large-format CFRP and thermoplastic skins.

Welding windows and non-destructive inspection criteria for thick-section thermoplastic structures are moving from research results toward acceptance criteria, which changes what a material supplier is asked to document alongside mechanical data.

Source: CompositesWorld — https://compositesworld.com/news/crashworthy-fuselage-tail-designs-for-h2-aircraft-using-thermoplastic-composites

Ultra-thin plies: 36 g/m² and 45 micrometres in CF/LMPAEK, laid by AFP

The German NATURE project, funded by BMWE and running 2023–2026 with DLR, Airbus Helicopters, Fraunhofer IGCV and TU Dresden, used carbon-fibre LMPAEK ultra-thin prepreg supplied by Fukuvi Chemical with Victrex resin. Fibre areal weight is 36 g/m² and a single ply is 45 micrometres thick, roughly seven fibres through the thickness and about one third of a standard CF/LMPAEK ply. Ply-orientation design freedom rises by a factor of about three.

Thin-wall double-curvature shells were laid by automated fibre placement, supported by a continuous ultrasonic welding bench and work on automation for sheet moulding compound. The practical effect is that “how thin can you go” becomes a standard customer question, and the answer depends on whether a supplier’s published range refers to areal weight of the ply or of the consolidated laminate.

Source: CompositesWorld — https://compositesworld.com/news/afp-with-very-thin-plies-of-carbon-fiberlmpaek-prepreg-for-sustainable-helicopter-structures-

CAMX 2026 material formats: glass-fibre PA6 tape, cross-ply laminates and sandwich panels

Two material suppliers used CAMX 2026 to publish tape and laminate formats with directly comparable figures. A PA6-based glass-fibre tape range is quoted at 50–70% fibre content, tape width 2–25 inches and laminate width 50–120 inches, with simulation material cards compatible with SimuQuick, SimuWarp and SimuDrape and with finite-element platforms; the same range includes a PET tape that holds mechanical properties at 85 °C and an HDPE tape with 20% higher tensile strength. A second supplier presented unidirectional tape in glass, carbon and hybrid fibre with PP, PA and PE matrices, cross-ply laminates and sandwich panels, positioned for press moulding, thermoforming, automated tape laying and fibre placement, overmoulding and continuous production, manufactured in Turkey, Hungary and the United States.

Published ranges of this kind are what customers benchmark quotations against, so fibre-content band, tape width, laminate width and temperature rating should be quoted in the same units rather than as a broad range.

Sources: CompositesWorld product reports from CAMX 2026 — https://compositesworld.com/products/tpc-frp-poles-and-fire-retardant-panels; http://compositesworld.com/products/complete-solutions-support-reinforcements-consumables-plug-and-mold-production

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top

联系我们 / Contact Us

丹阳理兴碳素制品有限公司
Danyang Lixing Carbon Products Co., Ltd.

地址 Address中国江苏丹阳市云阳街道南三环路丹阳高新技术创新园 212300
网址 Weblxcomposites.com
工作时间 Hours周一至周五 8:30-18:00