行业应用
Composite material requirements change completely between industries — a marine part lives in salt water and sun, an aerospace part lives in temperature and fatigue, a consumer electronics part lives in a cosmetic inspection. We organize our materials around those service conditions rather than around our own product categories.
Industry Pages
| Industry | 材料主要决定因素 | Start here |
|---|---|---|
| 航空航天与国防 | Specific stiffness, temperature capability, traceability | 航空航天与国防 |
| 汽车与交通 | 周期时间、重复性、单件成本 | 汽车与交通 |
| 船舶与海工 | Moisture resistance, fatigue, UV durability | 船舶与海工 |
| 体育休闲 | 重量、刚度、外观 | 体育休闲 |
| 工业与能源 | Chemical resistance, wear, temperature stability | 工业与能源 |
| 消费电子 | Cosmetic quality, thin-section rigidity, EMI | 消费电子（3C） |
如果您的行业未列出
These six cover most of what we supply today, but the constraint matters more than the label. If your application has requirements from this list — high-temperature service, pressure, wear, cosmetic finish, conductivity, certification — tell us the service conditions and we will tell you whether we have a material that fits. See the 常见问题 for common starting questions, or write to us through the contact page.
Explore Further
- 公司简介 ——我们的制造范围
- 资源中心 ——数据表、指南与常见问题
- Technical Blog ——材料选型指南
Why the material list changes by industry
The same composite behaves differently depending on what the environment does to it. A marine part lives in salt water and ultraviolet light, so resin choice and finish matter more than peak stiffness. An automotive part lives under cycle time and cost pressure, so the process decides the material. An aerospace part lives in temperature and fatigue, where traceability is part of the specification. A consumer electronics part lives in a cosmetic inspection, where surface and thin-wall flow decide everything.
如何阅读行业页面
Each industry page is laid out the same way: the primary material drivers, the products we recommend against those drivers, typical applications, and a short section on how to start a specification. Read the drivers first — if they do not match your service condition, the recommended product list will not either, and a different industry page is probably the better starting point.
当一个零件跨两个行业
Real parts rarely stay inside one column. A marine structural panel with a visible face has both a salt-water requirement and a cosmetic one. A battery enclosure is an automotive part with an electrical-conductivity question attached. In those cases the constraint that fails first sets the material, and the second constraint usually sets the finish or the lay-up sequence rather than the fibre.
Where to start
If the industry is still open, start from products instead and let the specification lead. The processing guides cover how each family behaves in a mould, and contact is the fastest route once you have an application and a process.