资源中心
Technical material for specification and evaluation: data sheets, processing guidance, market updates and the questions buyers ask most.
技术文件
| Resource | What you get | Use case |
|---|---|---|
| 技术数据表 | Grade-specific TDS, SDS and export documents | Supplier evaluation and engineering sign-off |
| 加工指南 | Process routes, consolidation guidance and failure modes | 规划成型工艺 |
| 认证与合规 | 文件与合规范围 | 质量体系审查 |
| 常见问题 | Ordering, technical and logistics questions | 询盘前的首次接触 |
Knowledge Base
| Resource | What you get | Use case |
|---|---|---|
| Technical Blog | Selection guides and material comparisons | Understanding materials before specifying |
| 行业新闻 | 每日复材行业动态 | 市场认知与规划 |
按任务选择起点
- Choosing a fabric — start with the 碳纤维织物选型指南
- 判断热固还是热塑 — read the 预浸料选型指南
- 比较增强材料 — see 碳纤维、玻纤与芳纶对比
- Understanding CFRTP — see the CFRT 生产与应用指南
How to use these documents in a real evaluation
Most supplier evaluations fail for the same reason: the documents are collected before the requirement is written down. It works better in three steps. First define the requirement — service temperature, load case, process and part envelope. Then pull the grade-specific TDS for the two or three candidates that could meet it. Only then compare, because a TDS is only meaningful against a stated requirement.
What is available and what is confirmed per grade
Technical data sheets, safety data sheets and certificates of analysis are issued per grade, not per product family. Areal weight, resin content, width and tow size are all fixed by the grade you order, which is why we do not publish a single number for a whole family. If a document is needed for an engineering sign-off or a customs file, say so when you request it so the right revision goes out with the quotation.
Where to start if composites are new to you
Read the processing guides first if the question is how a material behaves in a mould, and the 常见问题 如果问题是商务层面的。 product pages 承载规格表； technical data sheets page explains what is issued per grade. Anything that is still open after that is usually faster to answer directly — use contact and include the application and the process.