Continuous-fibre-reinforced thermoplastics (CFRT) use continuous fibre as reinforcement and a thermoplastic resin as matrix, combining low density, strength and toughness. This page covers our glass-fibre continuous product family: unidirectional tape, continuous thermoplastic tape and press-formed sandwich panels.
GF/UD Unidirectional Tape
Glass-fibre unidirectional tape is supplied in roll form for continuous processing and tape laying. Fibre content runs 55–70% by weight and consolidated ply thickness is 0.08–0.16 mm, depending on the resin system. Available systems include GF/PP, GF/PC, GF/PA6 and GF/PPS. Full-width rolls can be slit to narrow tape on request.

Continuous Thermoplastic Tape
Our continuous glass-fibre thermoplastic tape is produced by spreading the fibre to a uniform layer, holding tension consistently across the web and impregnating fully with resin. Typical moulding temperatures are about 200–230 °C for PP, 280–320 °C for PC and PA6, and up to 340–390 °C for PPS and PEEK. Slit widths and roll lengths are confirmed per grade.
Thermoplastic Honeycomb Sandwich Panel
Our thermoplastic honeycomb sandwich panel uses a PP honeycomb core with face sheets of continuous-fibre-reinforced thermoplastic laminate, typically glass-fibre-reinforced polypropylene (GF/PP). The panel is made by thermoplastic lamination in a sandwich construction.

Available thicknesses are 15, 20 and 25 mm, with areal weights of 3.21, 3.79 and 4.15 kg/m² respectively. Flexural strength is above 10 MPa and peel strength above 140 N·mm/mm, tested in accordance with ISO 4603, ISO 4605, GB/T 1456 and GB/T 1457.
What to Send Us for a Written Offer
Tell us the grade, resin system, target market, application and estimated volume, and we will confirm in writing which specifications and documents we can provide for your project.
邮箱: manager@lxcomposites.com · Or send your specification through our contact form.
